Flow Rate: 46.7~220 L/min
Pressure Range: 700~2,800 Bar
QUALITY ACCURANCE
TIMELY DELIVERY
Technical Data
MODEL | POWER | FOLW RATE @ WORKING PRESSURE | |
F250-HDS-17.5 | 250KW | 46.7 L /min @ 2,800 Bar | 12.34 GPM @ 40,000 Psi |
F250-HDS-20.6 | 250KW | 65.2 L/min @ 2,500 Bar | 17.23 GPM @ 36,000 Psi |
F250-HDS-22 | 250KW | 74 L /min @ 2,000 Bar | 19.55 GPM @ 29,000 Psi |
F250-HDS-24 | 335KW | 87 L/min @ 1,600 Bar | 22.99 GPM @23,000 Psi |
F250-HDS-27 | 335KW | 110 L /min @ 1,400 Bar | 29.06 GPM @ 20,000 Psi |
F250-HDS-30 | 335KW | 138 L/min @ 1,200 Bar | 36.46 GPM @ 18,000 Psi |
F250-HDS-32 | 335KW | 156 L /min @ 1,000 Bar | 41.22 GPM @ 15,000 Psi |
F250-HDS-38 | 335KW | 220 L/min @ 700 Bar | 58.12 GPM @ 10,000 Psi |
F250-HDS ----ULTRA-HIGH PRESSURE (UHP) WATERJET PUMP UNIT
THREE PLUNGER PUMP FLUID END
The complete set of F250 high-pressure plunger pump is maximum pressure is up to 280MPa. The liquid end (2800bar). The forced lubrication system of the power end solves the friction and overheating problem of long-term gear engaging. The domestic liquid end (pressure below 1800bar) can be completely exchanged with liquid end. Therefore, it can satisfy with pressure and flow rate requirements by only replacing liquid end, meanwhile, it solves the high cost issue of replacing parts as well. The "super simple maintenance " feature will benefit you a lot.
If the product is in demand, please confirm the proper pressure or flow in the table below and add into inquiry list.
POWER END
Precise gear ring design,superior performance,low noise 42CrMo,4:1 froged crankshaft.
Integrated crankcase design,effectively prevent plunger biased wear
The thrust of the crankcase is up to 105 KN
Equipped with force lubrication system,oil temperature,oil pressure,pressure differential monitoring system.
HIGH PRECISION PRESSURIZED THREE STAGE INTEGRATED DOUBLE FILTER ELEMENT FILTER
Intergrated filter cartridge design,simple structure,easy maintenance.
Design of graded filter element,high filtration efficiency and long service life.
Simplify water supply pipeline to avoid cavitation effect and accumulation of impurities.
Equipped with imported WIKA pressure gauges and pressure monitoring.
Equipped with the water tank to form a three-stage filtration system.
Mass flow and high quality booster pump,can reach 2~3 times the water demand.
FILTER WATER TANK
Double filter bag filtration system is built into the water tank to improve water supply quality.
Equipped with imported mechanical float ball valve to effectively eliminate the “water hammer effect”.
Equipped with liquid level and water temperature monitoring ,real-time monitoring of water supply status.
Stainless steel spray layered water tank,stable structure,long service life.
ORIGINAL IMPORT INTEGRATED SPECIAL CONTROL SYSTEM
Professional and special customized monitoring instrument,highly integrated control and monitoring.
Real-time monitoring of diesel engine and high-pressure pump operation,far away from high pressure terminal,safer operation .
Comprehensive monitoring and alarm protection system;
Liquid level switch:Monitor the state of water level to ensure that the unit will not run idle.
Water temperature switch : Monitor the water temperature to ensure that the unit will not run over temperature.
Water pressure switch:monitor the water inlet pressure and ensure the water supply pressure.
Water pressure differential switch :monitor intergral filter,alarm prompt to change filter element.
Oil pressure switch:Monitor the forced oil pressure status.
Oil temperature switch:Monitor oil temperature of crankcase of high pressure pump
Differential oil pressure switch:Monitor the status of oil filter.
DIESEL ENGINE
QSB8.9-C360-31 Cummins diesel engine is adopted to meet the national IIIemission standards,rated power/speed 294kw@1900,peak torque 1500N.m@1100~1800rpm.
High pressure common rail fuel system (HOCR) is adopted to ensure the accelerator responds fast at different RPMs,btrrer power performance and fuel economy,and lower noise.
The mature intelligent electronic control technology can switch the working mode according to the environment and operating conditions,and has the functions ofg self diagnosis,alarm and remote monitoring.
Equipped with 3000RPM,0.9M3/min air compressor to meet the requirements of surface and tube bundle cleaning peeumatic rotary gun.
HIGH STRENGTH INTEGRAL BASIC PALLET
The Basic Pallet is designed with and integral reinforced steel beam to ensure that the pump and motor are firmly fixed.
The important welding joints of the Basic Pallet shall be double-sided full welding and corrected after welding.
The Basic Pallet adopts vibration aging treatment to remove the internal residual stress to ensure the chassis is not deformed.
The Basic Pallet contains toolbox,miniaturized air pump,which makes the whole equipment simple.
COMTAINER COVER
Removable container cover assembly for easy replacement.
The container is customized to facilitate the operation and maintenance of the equipment.
The container adopes cold-rolled plate as a whole sandblasted plastic spray treatment to meet the requirements of Marine anti-corrosion.
FEATURES:
● Power ratings up to 250kW(340HP)
● Flow rate up to 545L/min(143.9gallon)
● Max pressure up to 40000PSI
● 3 plungers design,Wide variety of complementary ancillaries
QUALITY AND RELIABLITY:
● Stainless steel pump head,Forced lubrication system,Ceramic material or tungsten carbide plungers,Transmitted stably,Long working life under continuous load
BASIC CONFIGURATION:
● Vibration- proof pressure gauge
● Air pump system
● Safety Blasting Diaphragm
● Piping booster pump
● Pneumatic pressure regulating valve
● Protection of water supply system
● Start container
● Water supply piping system
● Stainless steel water tank
● Y shape filter
● Stainless vertical filter
● Skid Mounted or Skid mounted with cover ,Trailer and Cover
Application